> Актуаторы релейные

Актуаторы релейные

12 24 46
Подбор параметров
AKI-0416.03

AKI-0416.03

Характеристика: 2SU MDRC, 230VAC, 16A
Назначение: Switch Actuator 4-fold
Описание: The MDT Switch Actuator receives KNX/EIB telegrams and switches up to 12 independent electrical loads. Each output uses a bistable relay and can be operated manually via a push button. A green LED indicates the switching status of each output
AKI-0816.03

AKI-0816.03

Характеристика: 8HP REG, 230VAC, 16 / 20A, C-нагрузка 200?F
Назначение: Выключатель 8-кратный
Описание: The MDT Switch Actuator receives KNX/EIB telegrams and switches up to 12 independent electrical loads. Each output uses a bistable relay and can be operated manually via a push button. A green LED indicates the switching status of each output
AKI-1216.03

AKI-1216.03

Характеристика: 12HP REG, 230VAC, 16 / 20A, C-load 200?F
Назначение: Выключатель 12-кратный
Описание: The MDT Switch Actuator receives KNX/EIB telegrams and switches up to 12 independent electrical loads. Each output uses a bistable relay and can be operated manually via a push button. A green LED indicates the switching status of each output
AKK-01UP03

AKK-01UP03

Характеристика: Flush mounted, 230VAC, 16A
Назначение: Switch Actuator 1-fold
Описание:

The MDT Switch Actuator AKK receives KNX/EIB telegrams and switches up to 2 independent electrical loads . Each output uses relay (AKK-01UP.03: bistable relais, AKK-02UP.03: monostable relais). The outputs are parameterized individually via ETS. The device provides extensive functions like logical operation, status response, block functions, central function, delay functions and staircase lighting function. Additionally the device provides several time and scene control.
If the mains voltage fails, all outputs were switched off. After mains voltage recovery the relay position will be restored.
After bus voltage recovery the relay position is selected in dependence on the parameterization.
The MDT Switch Actuator AKK is available as flush mounted installation device for fixed installation in dry rooms.

AKK-021603

AKK-021603

Характеристика: 2SU MDRC, 230VAC, 16A
Назначение: Switch Actuator 2-fold
Описание: The MDT Switch Actuator AKK receives KNX/EIB telegrams and switches up to 16 independent electrical loads . Each output uses a bistable relay and can be operated manually via a push button. The outputs are parameterizedindividually via ETS. The device provides extensive functions like logical operation, status response, block functions, central function, delay functions and staircase lighting function. Additionally the device provides several time and scene control
AKK-02UP03

AKK-02UP03

Характеристика: Flush mounted, 230VAC, 10A
Назначение: Switch Actuator 2-fold
Описание:

The MDT Switch Actuator AKK receives KNX/EIB telegrams and switches up to 2 independent electrical loads . Each output uses relay (AKK-01UP.03: bistable relais, AKK-02UP.03: monostable relais). The outputs are parameterized individually via ETS. The device provides extensive functions like logical operation, status response, block functions, central function, delay functions and staircase lighting function. Additionally the device provides several time and scene control.
If the mains voltage fails, all outputs were switched off. After mains voltage recovery the relay position will be restored.
After bus voltage recovery the relay position is selected in dependence on the parameterization.
The MDT Switch Actuator AKK is available as flush mounted installation device for fixed installation in dry rooms.

AKK-03UP03

AKK-03UP03

Характеристика: Flush mounted, 230VAC, 10A
Назначение: Switch Actuator 3-fold / Fancoil
Описание: The MDT Switch Actuator AKK receives KNX telegrams and switches up to 3 independent electrical loads in operation mode as switching actuator. Each output uses a monostable relay and is individually agjustable via ETS. In aoperation mode as fan coil actuator a 3 step ventilators is controlled.
AKK-03UP03

AKK-03UP03

Характеристика: Flush mounted, 230VAC, 10A
Назначение: Switch Actuator 3-fold
Описание:

The MDT Switch Actuator AKK receives KNX/EIB telegrams and switches up to 2 independent electrical loads . Each output uses relay (AKK-01UP.03: bistable relais, AKK-02UP.03: monostable relais). The outputs are parameterized individually via ETS. The device provides extensive functions like logical operation, status response, block functions, central function, delay functions and staircase lighting function. Additionally the device provides several time and scene control.
If the mains voltage fails, all outputs were switched off. After mains voltage recovery the relay position will be restored.
After bus voltage recovery the relay position is selected in dependence on the parameterization.
The MDT Switch Actuator AKK is available as flush mounted installation device for fixed installation in dry rooms.

AKK-041603

AKK-041603

Характеристика: 2SU MDRC, 230VAC, 16A
Назначение: Switch Actuator 4-fold
Описание:

The MDT Switch Actuator AKK receives KNX/EIB telegrams and switches up to 16 independent electrical loads .
Each output uses a bistable relay and can be operated manually via a push button. The outputs are parameterized
individually via ETS. The device provides extensive functions like logical operation, status response, block functions, central function, delay functions and staircase lighting function. Additionally the device provides several time and scene control

AKK-04FC03

AKK-04FC03

Характеристика: 2SU MDRC, 230VAC, 16A
Назначение: Switch Actuator 4-fold / Fancoil
Описание:

The MDT Switch Actuator AKK receives KNX telegrams and switches up to 4 independent electrical loads in operation mode as switching actuator. Each output uses a bistable relay and is individually agjustable via ETS. In aoperation mode as fan coil actuator 3 or 4 step ventilators are controlled. In 3 speed operation the fourth channel can be used as output for valve control.

AKK-081603

AKK-081603

Характеристика: 4SU MDRC, 230VAC, 16A
Назначение: Switch Actuator 8-fold
Описание: The MDT Switch Actuator AKK receives KNX/EIB telegrams and switches up to 16 independent electrical loads . Each output uses a bistable relay and can be operated manually via a push button. The outputs are parameterizedindividually via ETS. The device provides extensive functions like logical operation, status response, block functions, central function, delay functions and staircase lighting function. Additionally the device provides several time and scene control
AKK-161603

AKK-161603

Характеристика: 8SU MDRC, 230VAC, 16A
Назначение: Switch Actuator 16-fold
Описание: The MDT Switch Actuator AKK receives KNX/EIB telegrams and switches up to 16 independent electrical loads . Each output uses a bistable relay and can be operated manually via a push button. The outputs are parameterizedindividually via ETS. The device provides extensive functions like logical operation, status response, block functions, central function, delay functions and staircase lighting function. Additionally the device provides several time and scene control
1 2 3


> Актуаторы релейные
© 2019 К-электротехник