AKK Compact flush mounted

12 24 46
Подбор параметров
AKK-01UP03

AKK-01UP03

Характеристика: Flush mounted, 230VAC, 16A
Назначение: Switch Actuator 1-fold
Описание:

The MDT Switch Actuator AKK receives KNX/EIB telegrams and switches up to 2 independent electrical loads . Each output uses relay (AKK-01UP.03: bistable relais, AKK-02UP.03: monostable relais). The outputs are parameterized individually via ETS. The device provides extensive functions like logical operation, status response, block functions, central function, delay functions and staircase lighting function. Additionally the device provides several time and scene control.
If the mains voltage fails, all outputs were switched off. After mains voltage recovery the relay position will be restored.
After bus voltage recovery the relay position is selected in dependence on the parameterization.
The MDT Switch Actuator AKK is available as flush mounted installation device for fixed installation in dry rooms.

AKK-02UP03

AKK-02UP03

Характеристика: Flush mounted, 230VAC, 10A
Назначение: Switch Actuator 2-fold
Описание:

The MDT Switch Actuator AKK receives KNX/EIB telegrams and switches up to 2 independent electrical loads . Each output uses relay (AKK-01UP.03: bistable relais, AKK-02UP.03: monostable relais). The outputs are parameterized individually via ETS. The device provides extensive functions like logical operation, status response, block functions, central function, delay functions and staircase lighting function. Additionally the device provides several time and scene control.
If the mains voltage fails, all outputs were switched off. After mains voltage recovery the relay position will be restored.
After bus voltage recovery the relay position is selected in dependence on the parameterization.
The MDT Switch Actuator AKK is available as flush mounted installation device for fixed installation in dry rooms.

AKK-03UP03

AKK-03UP03

Характеристика: Flush mounted, 230VAC, 10A
Назначение: Switch Actuator 3-fold
Описание:

The MDT Switch Actuator AKK receives KNX/EIB telegrams and switches up to 2 independent electrical loads . Each output uses relay (AKK-01UP.03: bistable relais, AKK-02UP.03: monostable relais). The outputs are parameterized individually via ETS. The device provides extensive functions like logical operation, status response, block functions, central function, delay functions and staircase lighting function. Additionally the device provides several time and scene control.
If the mains voltage fails, all outputs were switched off. After mains voltage recovery the relay position will be restored.
After bus voltage recovery the relay position is selected in dependence on the parameterization.
The MDT Switch Actuator AKK is available as flush mounted installation device for fixed installation in dry rooms.



© 2019 К-электротехник